K.M.Panchal & co.

All Geared Double Column Radial Drilling Machine with Auto Feed - 40 RPDA

Model - 40 RPDA

40 mm cap., 4 Auto feeds, & 12 spindle speeds, heavy duty, double column type, All geared with Auto & manual feed.

Other Models::

PT-12

38 PRD

40 PRDA

KBS-100, KBS-175

Technical Specification & General Dimensions ::

Capacity
Driling in Steel	40
Drilling in C.I.	40
Tapping in steel	30
Spindle
Spindle Travel	200
Spindle Taper	MT-4
No.of spindle speed	12
Range of spindle speed	75-1545
No. of feed	04
Feed value mm/rev.	0.1, 0.2, 0.3, 0.4
Working Range
Column diameter	240
Max/Min distance between spindle center of column face	1000/290
Max/Min distance between spindle nose to base plate	1050/410
Vertical movement of arm on column	640
Size of base plate	1600 x 800 x150
Working Surface of table	560 x 400
General
Number/Center distance of "T" slots for base plate	3-200
Size of "T" slots for base plate	M-16
Number/Center distance of "T" slots for working table	3-135
Size of "T" slots for workinh table	M-12
Nett. weight of the machine (Appx.)	2000 kg.
Overall dimensions of the machine	2000 x 1620 x 1060
Shipping dimensions of the machine	2100 x 1720 x 1160
Power
Drilling head motor	1.5 H.P. / 3Ø-50Hz/ 750-1550RPM
Arm elevating head motor	1 H.P. / 3Ø-50Hz/ 1500RPM
Coolant pump motor	0.25 H.P. / 3Ø-50Hz/ 2880RPM
Standard Accessories
3Ø-50Hz/1.5H.P./750-1500 RPM Flaged mounted electric motor
3Ø-50Hz/1H.P./1500 RPM Flaged mounted electric motor
3Ø-50Hz/0.25H.P./1500 RPM Flaged mounted electric motor
Machine Lamp
Instruction Manual
All electicals will be supplied with complete wiring-contactors relays with panel board fitting.
Extra Accessories
Working table (Plain)
Working table (Tilting type)
Drill chuck-Arbour